Each stop of a line has its own departure settings, in the stop's "Cargo Filter" window (click the stop in the line window). They decide how much the vehicle loads there and how long it may wait.
1The settings
| Setting | Values | New stop | Source |
|---|---|---|---|
| "Load if Available", "Full Load (Any)", "Full Load (All)" | one of three | Load if Available (measured) | cargofilter_window.tl:798-821 |
| "Min. Stop Time" | 0–600 s, step 10 | 0 s (measured) | cargofilter_window.tl:841-845 |
| "Max. Stop Time" | 0–600 s, or "---" (no limit, slider at the end) | 600 s (measured) | cargofilter_window.tl:855-863 |
| "Max. Additional Wait" | 0–600 s, step 10 | 60 s; 30 s at a road or tram station without rail | cargofilter_window.tl:827-831, line_util.tl:479-487 |
| "Fill Level", per loaded cargo | 0–100 %, step 1 | 100 % | cargofilter_window.tl:698-704, line_util.tl:473 |
- Clicking a time opens a number box: values above 600 s can be typed there (
cargofilter_window.tl:204-208). - The three times keep each other in order: raising the minimum or the additional wait above the maximum raises the maximum too (
cargofilter_window.tl:834-836,cargofilter_window.tl:848-850); lowering the maximum lowers the other two (cargofilter_window.tl:865-869). Nothing is adjusted while the maximum is "---". - Changing any of them marks the line as custom: the automatic configuration no longer touches its Load lists (
cargofilter_window.tl:438, see Loading and unloading speed). The automatic configuration itself never changes the mode or the times, but it resets every Fill Level to 100 % (line_util.tl:497-721,line_util.tl:513,line_util.tl:545).
2Fill Level: a cap per cargo
The Fill Level is the most of that cargo the vehicle takes at this stop, as a share of the vehicle's capacity, rounded to the nearest unit (measured in game).
| Vehicle | Fill Level | Leaves with |
|---|---|---|
| truck, 15 places, logs | 50 % | 8 (7.5 rounded up) |
| truck, 22 places, fabric | 70 % | 15 every time (15.4) |
| train, 18 places, glass | 48 % | at most 9 (8.64) |
| tram, 28 places, fuel | 66 % | at most 18 (18.48) |
- Cargo already on board counts: a tram that arrived with 14 fuel left with 18, not 14 + 18.
- Above the cap nothing is loaded and nothing is unloaded because of it: a truck that arrived with 22 fertilizer (cap 11) left with 22.
- 0 % means: do not load this cargo here.
- With a Full Load mode, the cap counts as full: timber trucks with a 50 % Fill Level waited about 270 s and left with 8 of 15, not 15.
- There is no unload percentage. Unloading is decided by the Load list and "Force Unload All Cargo On Arrival" (Loading and unloading speed).
3Full Load and the stop times
- Load if Available: the vehicle takes what is there and leaves.
- Full Load (All): the vehicle waits until it is full. Timber trucks waited 460–566 s and left with 15 of 15.
- Full Load (Any): the vehicle leaves when one cargo is full. A timber and planks train left with 143 and 144 logs after 369–380 s; two other departures after about 30 s with 57 and 118 logs are not explained.
- Max. Stop Time ends the wait, even with nothing loaded. A vegetables train in Full Load (All) with a 120 s maximum either filled up (64 of 64) in about 25 s, or left after 116–120 s with 26 or 0. With the default 600 s it left with 26 of 64 after 596–600 s.
- Min. Stop Time is the whole stop, loading included, not extra time after it: with 60 s, glass trains stopped 55–61 s every time, whatever they loaded.
- Max. Additional Wait: "Maximum wait time after loading to improve vehicle distribution" (
cargofilter_window.tl:828). The vehicle window shows "Ensuring safe distance" while the vehicle waits for its scheduled departure (entity_window_util.tl:2285-2286), presumably during this wait. - Several vehicles at one stop load at the same time, whenever each one arrived (seen in game). Two timber trucks that arrived about 90 s apart left at the same second, each with 8. How the cargo is shared between them was not measured.
The rules above were measured with the Second Screen Dashboard database (snapshots every 2 s, so stop times are ±2 s), November 2026.
4Good to know
- A long wait with Full Load at a stop where little cargo arrives blocks the platform: other vehicles of the line queue behind it.
- A short Max. Stop Time with Full Load can send vehicles away empty if they come back before new cargo is there.
- Once, a train in Full Load (All) stopped 783–992 s with a 600 s maximum. The cause was not found.
Official wiki vs game scripts
Adds detail"Full load (any): The vehicle will stop and wait until one cargo type is fully loaded. Full load (all): The vehicle will stop and wait until it is fully loaded." "In the vanilla game "all" and "any" only applies to trains and ships […] Any other vehicle type will wait for full load in both cases." Each cargo is loaded "to what percentage of a vehicle's total capacity". (Lines and Vehicles)
Three departure modes, Min. / Max. Stop Time 0–600 s (or no limit), Max. Additional Wait 0–600 s (60 s, 30 s road), Fill Level 0–100 % per cargo; measured: Fill Level caps the cargo on board, rounded to the nearest unit, and counts as full for Full Load; Max. Stop Time ends a full load, even empty; Min. Stop Time includes loading; vehicles at one stop load together.
Paths are inside the game's base/content folder or its zip files.